Refurbishing a Gargantua bench slat

Very rarely (+/- 20 min)

Make sure that the damage can't be repaired by simply sanding the wood. If that’s not possible, follow the steps below to replace a bench slat at the Gargantua picnic table.


Follow the instructions below or in the video above

  • Demount the bench from the table
  • Take out the damaged slat
  • Place the new slat, nicely centered
  • Put a piece of tape on the drill at 15 mm from the tip. This will indicate how deep you can drill
  • Drill the holes 15 mm deep
  • Screw in the new screws
  • Caution! Don't tighten it too much, the screw should hug the frame softly

You just DIY-fixed your table! There may be a color difference with other planks, but this will fade over time when the furniture is outdoors.


These are the tools you need

  • New bench slat
  • Electric screwdriver
  • Drill with diameter 3 mm
  • New screws
  • Tape
  • Ruler